Electric vehicle charger

Electric vehicle (EV) cable channel

How to apply for an electric vehicle (EV) cable channel, scheme eligibility, costs and application process

Planning application requirement update

From 21 October 2026, changes to planning law mean that most people with permission for an EV cable channel will not need to apply for planning permission for a home EV charger.

You do not need to apply for planning permission for the EV cable channel itself. You will still need to apply to Oxfordshire County Council for permission to have a channel installed and to use it.

Different planning or heritage restrictions may apply to your home EV charger if you live in a conservation area or listed building, or near a scheduled monument. It is your responsibility to check whether you need planning permission or another consent before installing your charger.

Read more below.

Electric vehicle (EV) cable channels at a glance

An EV cable channel is a channel installed in the pavement that lets you safely charge your EV from a home EV charger if you don’t have a driveway or garage.

You must apply to Oxfordshire County Council to have an EV cable channel and a licence. The licence allows you to run an EV charging cable through the channel to charge your car.

Not all properties are suitable for an EV cable channel – you should check your eligibility before you apply. 

Costs

  • *£300 upfront for standard installation of up to 2.5m length channels (including first two years' licence)
  • Around £100 annually after year two to renew your licence

The cost is heavily subsidised by grant funding from the Office for Zero Emissions and the Department for Transport. 

* For EV cable channels longer than 2.5m or complex installations, including changing the height of the pavement, there may be an additional cost. Costs are assessed and quoted on a case-by-case basis. Applicants are responsible for funding additional costs.

Your responsibilities

If your application is approved, you must agree to the licence terms and conditions.

You must also be prepared to arrange and pay for: 

  • EV charger installation (government grants are available, see below)
  • Updating your car/home insurance to cover you for any third-party liability in case of damage/injury caused by using your EV charger or cable on the street (minimum £5 million) 
  • Annual electrical safety checks on your home EV charger 
  • Check whether you need planning permission, listed building consent or any other consent before installing your home EV charger, and obtain any consent required

Update to planning and building permission

From 21 October 2026, changes to planning law mean that most people who have applied directly to Oxfordshire County Council for an EV cable channel will not need to apply for planning permission to install a home EV charger.

You do not need to apply for planning permission for the EV cable channel itself. Oxfordshire County Council installs and owns the channel. You must still apply to us for permission to have a channel installed and to use it.

Planning and heritage restrictions may still apply to your home EV charger. This may be the case if:

  • you live in a conservation area
  • your property is a listed building or is within the grounds of a listed building
  • the proposed installation is within a scheduled monument
  • your installation does not meet the conditions and limitations of the permitted development rules.

It is your responsibility to make sure that your home EV charger complies with planning law before it is installed. If you are unsure, contact your Local Planning Authority, which is your district or city council.

Oxfordshire County Council’s approval of an EV cable channel relates only to the cable channel scheme. It does not constitute planning permission or confirmation that your home EV charger is lawful under planning legislation.

You can read the full statutory text on https://www.legislation.gov.uk/.

Eligibility

You can apply if:

  • The road outside your property is a public highway (you can check this on the Map of streets we maintain)
  • You do not have off-street parking (i.e. a driveway, garage or parking court)
  • You can park safely and legally on the road directly outside your property with no parking restrictions
  • You live at the property, and you have permission from the owner to install an EV charger
  • You have somewhere outside your house to install an EV charger so that it doesn’t stick out over the pavement (footway)
  • There is only a pavement between your property and the road; no grass verges, trees or barriers
  • The pavement is 3 metres wide or less and at least 60mm higher than the surface of the road
  • There is no other EV cable channel, streetlight or other electrical equipment on the pavement or road within 7.5m of where you want the EV cable channel installed

Important to consider: An EV cable channel may not be right for you if:

  • You cannot regularly park outside your property
  • You are unable to meet the insurance or legal requirements

EV charging equipment standards

Check with a registered electrician that you can have an EV charging point installed before you start your application

  • Your charger must be a domestic EV charger which supplies 7.5kw or lower
  • You must use an EV charging cable with a diameter of 16mm or less to make sure it fits into the channel
  • All EV chargers must be installed to meet the minimum safety standard requirements of the government chargepoint specification for households with on-street parking
  • You must never use an extension cable or a 3-pin plug EV charging cable

Application and installation process 

The application process has six stages:

1. Check eligibility and apply online 

Read the guidance and check you are eligible before you apply to avoid disappointment. You will need; 

  • Permission from the property owner to have an EV charger installed 
  • Confirmation from a registered electrician that you can have an appropriate EV charger installed
  • Measurements of the pavement outside your property where you want the channel installed
  • Photographs marked up to show where you want the channel installed

Check and obtain any consent required

2. Site visit 

We will visit your site and tell you if your application is successful within eight weeks. You do not need to be at home.

Before installing your home EV charger, check whether you need planning permission, listed building consent or another consent. If you are unsure, contact your Local Planning Authority.

3. Update your car/home insurance and make your payment 

If your application is successful, you will need to arrange your insurance. We will send you a guide to help you. Use the link we send you to provide your insurance details and make your payment online.

4. Installation of EV cable channel 

We will install your EV cable channel within 4-6 weeks

5. Install your home EV charger and start charging from home

Arrange for your EV charger to be installed and send us a copy of the installation certificate (EICR) within six weeks of your EV cable channel being installed.

If you fail to do so, your licence will be suspended, and your EV cable channel may be disabled 

After we receive the certificate, you can start using your EV cable channel to charge your EV at home.

The government provides EV chargepoint grants for households with on-street parking

Annual licence renewal

You will need to renew your licence annually. 

To do this, you must provide your insurance details and the certificate from your annual EV charger electrical safety check. 

After year two, you will also need to pay an annual renewal fee of around £100. We will send you a reminder every year before your renewal is due.